N-D-80-512-ASME

The American Standard Commercial Gas Model N-D-80-512-AS is designed to deliver large quantities of hot water economically through utilization of the most energy–saving techniques. Customary applications include industrial buildings, motels, hotels, schools, hospitals, restaurants, laundromats, car washes and multi-family developments up to 30 single or 21 double bath units.

N-D-80-512-AS FEATURES:
  • Heavy Gauge Steel Tank incorporating only seven internal flue tubes resulting in fewer critical welds to yield added years of trouble-free service.
  • ASME Construction Model available.
  • Inner tank glass-lined with Dur a-Glas™ and fired at 1600° F for optimum protection from the effects of corrosion.
  • R-8.3 non-CFC foam insulated to save energy and reduce fuel costs by maximizing heat retention.
  • Four anode rods to prolong tank life.
  • Self-Cleaning turbulence inducing cold water inlet-tube engineered to diminish hard water area sediment deposits.
  • Full size hand-hole cleanout for eased tank inspection and/or removal of sediment deposits.
  • Electronic direct-spark ignition system saves fuel by eliminating the need for a standby gas pilot.
  • Automatic motorized flue damper reduces tank heat loss during standby periods for lowest operating costs.
  • Fully adjustable 24-volt controls provide temperature settings to 180° F. When installed with a mixing valve, the N-D-80-512-AS can deliver 180° F sanitizing and 140° F general purpose hot water simultaneously.
  • Factory installed energy cut-off system and pressure/temperature relief valve.
  • Two inch rear and front water connections for simplified replacement of similar units, connection to circulating lines and eased multiple heater or storage tank installations. CSA certified to meet NSF/ANSI 5 Standards.
  • AMERICAN STANDARD gas water heaters are certified at 300 PSI test pressure and for 150 PSI working pressure. All tanks are hydrostatically tested at the factory.
  • Tested and listed with CSA International in accordance with ANSI Z21.10.3 - CSA 4.3 for up to 180°F operation as an instantaneous and/or automatic circulating tank heater. Meets ASHRAE 90.1 1999.
  • Three year limited warranty on inner glass–lined tank and one year limited warranty on all other component parts.


1425 W 135th St.
Gardena, CA 90249
Phone: (323) 753-2541
Fax: (323) 753-6362
Toll Free: (800) 705-1444

Monday–Friday
7:00 a.m.–4:00 p.m. 24-Hour Emergency Service
State Plumbing Contractor #C3615183
Servicing Commercial and Residential Water Heater Sales, Installation Parts

  • Los Angeles
  • Orange County
  • San Fernando
  • Riverside County
  • San Bernardino County
  • Ventura County
  • Gardena
  • Torrance
  • Manhattan Beach
  • Hermosa Beach
  • Redondo Beach
  • Marina Del Rey
  • Venice
  • Palos Verdes
  • San Pedro
  • Carson
  • El Segundo
  • Santa Monica
  • Long Beach